How To Dye Skateboard Wheels| Top 10 Easy Steps |
Last Updated on June 1, 2023 by BoardsRiding
Dying a wheel does more than just add a new colour; it can also make worn-in wheels look newer. In this article, I will show you how to dye skateboard wheels. Before you begin, read the entire instruction and make sure you understand the steps. Because this instructable requires a stove as well as hot items, anyone below the age of 13 should be supervised by an adult.
Acetone can be used to remove printed graphics before dying. (It should be noted that several modern nail polish removers are not 100% acetone, and thus may not remove graphics as easily as pure acetone.)
When you factor in cleaning as well as prep time, dying the skate wheels can take some time; however, the actual dye procedure is quick. Secure your workspace so that you don’t make an unneeded mess.
This usually means an even surface with plenty of space to move around. We’ll remove the wheels as well as the bearings entirely, so you’ll need a safe place to store them.
Are you a good skating lover? If and want to find out some awesome things which make your skating more interesting and memorable, and for that, I will suggest these best cameras for skateboarding; this will help you to capture your best moments while skating. You should wear good quality shoes and have a top quality backpack which gives you help to carry on your skateboard.
You Must Be Aware Of The Following:
You Will require:
You will require the following items:
How To Remove Graphics From Skateboard Wheels:
How To Dye Skateboard Wheels:
How to paint skateboard wheels? Skateboard wheels are made of a variety of materials, the most common of which is polyurethane. Polyurethane is a plastic which can be painted any colour. You may apply any kind of fabric dye or special dyes for skateboard wheels. Remove your skate’s wheels and any other components you would like to dye. I’m removing the wheels as well as the kingpin nuts with a T Skate Tool.
We also recommend that you remove the bearings from the wheels prior to the dye bath. While working with hot water, wear gloves made of rubber to protect your hands from staining and to insulate them. Prior to dyeing, erase any designs or logos from the wheels with an acetone-soaked cotton swab and pre-wash the wheels in a solution of soapy water. It helps in the removal of any finishes which could cause problems with dye absorption.
Before dying, the wheels should be thoroughly cleaned, particularly if your skates aren’t brand new. To clean my hardware, we used isopropyl alcohol and cotton rounds. Wash the wheels with soap and scrub dirt and grime away with an old toothbrush. Skip this set if you’re starting from scratch.
If you are too conscious regarding your skateboard and you want to protect your skateboard from all kinds of damage and also want to fix all the issues in a timely read all these guidelines. like this, how to clean skateboard grip tape and trucks, and how to hang a skateboard on the wall in a proper way.
Here’re Steps On How To Dye Your Skateboard Wheels:
- To dye your skateboard wheels, first remove them from the board.
- Fill the pot halfway with water. Ensure you have sufficient water to completely immerse the wheels.
- Bring the water to a boil before adding the dye. Remember that the more dye you use, the darker the colour of what you’re dying will be.
- Take care with the boiling water because it is a scalding hazard! Do not do it in the presence of small children or animals, for example.
- Wearing gloves, add the contents of a bottle to the boiling water as well as stir properly with a utensil you don’t particularly like to ensure that the dye is evenly distributed.
- Then, drop your clean, bearing-free wheels inside the dye bath. Soak the wheels in the mixture for a minimum of an hour; the more they soak, the deeper the colour will be.
- Remove your wheels from the dye bath once you’re satisfied with the colour. Rinse the wheels thoroughly with cold water till the water is clear.
- Allow them to dry completely before reinstalling them on your skateboard. Completely dry the wheels. It’s critical to be vigilant to ensure that no moisture damages your skates.
- Add the bearings to your wheels and reassemble the remaining hardware you ditched for the paint job.
- It’s critical to tune your skates after they’ve been reassembled. Check that your truck’s action is bending properly to ensure each wheel can rotate easily with a smack but not wobble to the sides.
It’s also an ideal opportunity to grease your bearings. I prefer Bones Speed Cream, but you can use any lubricant you prefer. You’re ready to roll because your wheels have been spruced up!
Dribble hot glue on the wheel before dying it. The hot glue areas will not be dyed, resulting in a pattern. (the brown rims)
Before dying, mask off sections of the wheel with electrical tape or other waterproof tape. A big piece of tape can also be used to create a dual-color wheel. Take advantage of your wheel’s fresh beginning in life! You now have colorful skateboard wheels that you can show off to your friends!
Can you paint skateboard wheels? And if we can paint a skateboard wheel, how long does it take to dye skate wheels. Yes, we can paint skateboard wheels and this procedure takes 20 minites to a maximum one hour. You can also fine
Can You Bleach Skateboard Wheels
Yes, skateboard wheels can be bleached. If you want to have extremely white wheels, bleaching them is a good way to get there. However, it’s important to remember that bleaching can harm the wheel’s material and impair its performance. So, if you want to get the most out of your wheels, you may want to skip the bleaching procedure entirely.
Should I Clean The Wheels Of My Skateboard?
As you skate over various terrains, your wheels naturally take up foreign materials as well as debris that can cause long-term harm to the ball bearings. So, knowing how to properly clean skateboard bearings as well as wheels is essential if you want to keep skating!
Is It Necessary To Oil Skateboard Wheels?
The bearings inside the wheels must be lubricated, but the wheels themselves do not need to be lubricated. To keep friction away from your bearings, use a Teflon-based lubricant. Avoid using products such as WD-40, which will quickly dry out and cause the bearings to absorb dirt.
You want to use your skateboard wheels on a roller skate, but you don’t know about it. Check out this guideline on Skateboard Wheels On Roller Skates.
How to dye roller skate wheels:
Here’re The Steps To Dye Roller Skate Wheels:
Short Summary: Dying a wheel does more than just add a new color; it can also make worn-in wheels look newer. We used RIT dye for this process. The base color used on the wheel will have an impact on the dye results. If wheels have graphics, remove these graphics before dying.
FAQs:
Final Verdict:
In this article, you have learned about how to dye skateboard wheels. Have fun and stay safe! Thank you!