Last Updated on October 16, 2022 by BoardsRiding
A skateboard truck is a vital component, and cleaning it should be an integral part of the entire maintenance regime of the skateboard. It will save your bucks wasted in replacement and increase the overall lifespan of the skateboard.
In our in-depth guide about how to clean skateboard trucks by using items from house holds, we will disclose all the methods and tips you need to know.
Everybody skater enjoys cruising down crusty hills or sanded beaches until they see the truck of their skateboard covered in mud, grease, or even worse, gum or junk. Of course, a better ride would require a thorough cleaning of the skateboard truck.
Cleaning the skateboard trucks is not rocket science; anybody with basic knowledge of cleaning and tools can easily do it.
The blunt tricks skaters perform are only because of sturdy trucks of skateboards, which smoothens the flow and make the tricks bang on.
Also Read This: Top-6-Best-Skateboard-Trucks-For-Heavy-Riders
The maintenance and cleaning of trucks cannot be emphasized more as regular cleaning will boost the performance and encourage skaters to perform more bluntly. Therefore, we are going to put an end to the fuss related to:
How to Clean Skateboard Trucks
If you are fond of skating and you own a skateboard, then you must know that a clean, tight truck would last way longer than a dirtier, squeaky one. That is why it is essential to clean this vital skateboard component.
Although cleaning the skateboard truck is not a rigorous task but indeed a long one. The essential tools for cleaning skateboard trucks are pretty basic, and you can easily hunt those in your house toolbox. Before we dive into the process, make sure you have:
- A screwdriver
- Paper towel
- Slipjoint pliers
- Small cleaning brush
Now that you have collected all the necessary things to do a thorough cleaning roll your sleeves and get to work. First, we need to detach the skateboard truck. For this, take out your screwdriver along with slip-joint pliers.
Unscrew the visible nuts and then detach these nuts from bolts. Make sure to secure these nuts at a safe spot so that you don’t end up missing them.
After removing nuts, examine the deck and truck properly because it’s time to separate both. You are not going to need any tool for it.
You can easily detach the truck by hand. Pull it gently, and you will be done. Make sure the kingpin is facing outward.
The time for thorough cleaning has arrived. Take your brush, wet it, and rub it gently over parts to remove mild stains. Pat the parts with a paper towel to dry them. Now disassemble other parts such as base plate, bushings, and truck hangers.
Now, bring out WD40 and spray it over a clean paper towel. Apply generously to eradicate stains, filth, grime, dirt from every part. All the stubborn stains, along with dirt and specks of dust, will be removed in no time.
Make sure to pay extra attention to axles. Out of all the skateboard truck parts, the axles turn out to be filthiest due to contact and grind. It happens as gunked-up bearing tends to deposit heaps of filth on axles. Make sure the axles and bearing are not cracked and in top-notch condition.
Apple WD40 on every truck component and clean it to its fullest. After a thorough cleaning of every part, now it’s time to reassemble them. The thing to remember here is that you need to screw all the nuts and bolts appropriately.
Please don’t overdo it or underdo it. After securing everything in place, take a small test ride to check for loose nuts or squeaky noise. The cleaning would significantly boost performance speed and acceleration.
Get Rid of Squeaky Skateboard Truck
The whole refreshing experience of riding your beasty skateboard and trying new tricks turns into an irritating one when you constantly hear squeaky noises coming out of it. Well, it’s okay for a skateboard truck to produce squeaky noises to some extent, but if these are starting to climb your head. Maybe it is high time to give them a shut-up call.
Well, for your information, the core reason skateboard trucks produce such annoying noises is the constant rubbing of bottom bushing against the hanger. You can cure it by using a simple ingredient.
Silence your skateboard truck by using paraffin wax. Now you must be thinking, oh you mean candles, but no, candles are a mixture of different waxes. We need paraffin wax particularly.
Rush to store and buy a small block of paraffin wax. It doesn’t costs much. Grate the wax with the help of a grater. Now take grated wax and start applying it in the pivot cups. You can do the application process with your hands.
Don’t forget to put some in the bushings. Make sure you apply it on bushes, the top, and the bottom. Apply generously over the hanger’s surface and hangers pivot.
Conclusion: How To Clean Skateboard Trucks
Some skaters might think, what is the point of cleaning skateboard trucks again and again? If it’s meant to get dirty and stained. Well, in our guide on how to clean skateboard trucks by using household items, we have answered this concern as well.
A cleaned skateboard truck enhances the lifespan of the skateboard and makes the skateboard perform incredibly well. Boosted performance and powerpack acceleration will encourage the rider to go the extra mile.