Do Hoverboards Catch Fire and Still Explode in 2023
Last Updated on January 2, 2023 by BoardsRiding
Hoverboards are gradually getting more popular, especially among kids; however, due to the past explosions, parents seemed to be worried that Do Hoverboards Catch Fire and Still Explode.
In the beginning, hoverboards caught fire and exploded more often because of some malfunctioning. Therefore, the anxiousness of parents about the explosion is quite apparent.
But before discussing do hoverboards catch fire and still explode, it is essential to know what factors are causing the hoverboards to explode.
What Causes Hoverboards Exploding?
Following are the reasons that cause hoverboards exploding:
A hoverboard is an electronic device that relies on heavy-duty batteries for acceleration so that a bit of defect can cause a massive explosion. Mainly lithium-ion 18650 battery causes the outbreak, including different cells with 4.2 volts each.
Therefore, when a hoverboard is overcharged with such batteries, its polythene sheets are compromised. As a result, they cause short circuits and become the reason for hoverboard battery fire.
Batteries may also explode due to overheating during the ride caused by the defective cooling system or function.
#2. Wires/ Wiring:
The other major cause of the hoverboard explosion is the lousy quality insulation. The terrible quality insulations on the wires cause a short circuit as they wear out in no time and result in a battery explosion.
After knowing the reasons behind the hoverboard explosion, the main thing is to know if the hoverboard caught fire and still exploded. So here is this thing:
Do Hoverboards Still Catch On Fire?
There were no recalls of hoverboards after 2018, according to the hoverboard recall 2020 list of US Consumer Product Safety Commissions because the modern hoverboards are manufactured according to the UL2272 standards.
Do Hoverboards Still Explode?
The most reasonable answer for do hoverboards still explode in 2021 is no, they don’t explode now because, in this era, the hoverboards meet all the standard requirements of UL2272.
Most lithium-ion batteries are used in all hoverboards. They are smaller in size but can store a large amount of electricity. But on the negative side, they are sensitive to overheating and causing the explosion.
The UL tested the hoverboards before launching them to prevent the batteries from exploding and analyzed whether they did explode or were safe to use. And then found them according to the safety standards.
Ways to Prevent the Hoverboard from Catching Fire or Exploding?
There is no doubt that these days the production of hoverboards includes the safest and modern techniques, so there is almost no possibility that your hoverboard will explode.
However, it is still a fact that it is an electronic machine. Therefore, there are some ways by following which you can prevent your hoverboard from the explosion, including:
#1. UL2272 Certification:
The first recommended thing you have to look for while buying a hoverboard must be certified by a reliable organization. You can check the certification from the product description or by reading a buyer’s guide.
In this modern era, the most reliable and trusted organization for the hoverboard is the UL2272. They ensure that rider is safe from any explosions and prevent the hoverboards from catching fire.
The certification process of UL2272 includes many scientists who perform several tests, including overcharging, overheating, water tests, etc. These tests are performed to check the eligibility and safety of the products.
#2. Charging Time:
Overcharging may also lead the battery to be exploded that’s why you have to be extra active and keep checking your battery until it gets completely recharged.
Charge your battery according to the period provided by the company as it varies from model to model and company to company.
The standard period of a good quality hoverboard lies between 3-4 hours, so make sure to chare your product within the given time. It is the only way to save your battery from getting overcharged and prevent it from exploding.
#3. Original Charger:
Another important thing that helps prevent your hoverboard from getting exploded is charging your device with its original charge. In case if your original charger is not working, then do the charging of your device with a company-recommended charger.
It is essential because only the company knows how much voltage and ampere their products require. Furthermore, it also prevents your hoverboard from inefficient charging.
That’s why it is recommended to use the UL2272 certified charger instead of the local ones to prevent it from catching fire. They can stop overcharging when it reaches their optimum level, and It also saves the battery from over-heating.
#4. Don’t leave on the charging overnight:
You should also avoid leaving your device to charge overnight as it is mentioned above that the standard battery timing lies within 3 to 4 hours. Otherwise, it will affect your batteries badly, and you will not be able to retrieve them.
Therefore, it is a great thing to avoid overnight charging as it may also cause your hoverboard to be overcharged until you must be aware of its consequence.
#5. Don’t charge after the ride immediately:
After getting the low battery indicator from your hoverboard, you have to plug in your charger and let it charge in the recommended period. But the last precautions you must take while using the hoverboard is that after getting the low battery indication, you must wait for your device to cool down after taking the ride.
The reason behind this precaution is riding ends up heating your motors, and charging also causes the increase of temperature and which causes the battery explosion, so it is recommended to wait until the temperature lowers.
It clearly shows that modern hoverboards cannot catch fire as they are launched in the market after getting the UL certification. But it is up to you to follow the steps mentioned above to get the positive answer to your curiosity that do hoverboards catch fire and still explode.