Best Wood For Skateboards For All Time
Last Updated on October 13, 2022 by BoardsRiding
Are you interested in finding out which is the best wood for skateboards? So to get the answer, read this article. It can be crafted from various materials by their respective manufacturers. On the other hand, each material’s qualities and other features are unique.
The characteristics dictate that the boards come in a wide range of quality, including stiffness, strength, elasticity, etc. Therefore, some boards are both made of wood and plastic. I always recommend to everyone that they abandon their preference for wooden things.
Skateboard decks can be crafted from wooden planks or plywood, but the variety of wood used in their construction is critically significant. Because every kind of wood has benefits, a deck constructed from a specific wood can only serve a specific function.
First, we will go over maple wood, a type of wood that is often highly tough and long-lasting. Skateboards constructed expressly for downhill riding are typically made of wood, which is more widely utilized.
Best wood for skateboards
The Canadian Maple is the species that the Ministry of Wood deems to be the one that works best for the production of boards. This component is the one that is used in most factories and for the longest periods. Birch plywood and bamboo are two more excellent building materials to work with.
Nevertheless, every one of them possesses unique qualities and traits. I tried to analyze and contrast some of the most frequent types of materials used in the production of boards. The data can be viewed in conjunction with the attributes in the table.
Also Read: Best-Skateboards-for-Heavy-Riders
According to studies conducted by East Tennessee State University, the type of wood best suited for skates production is Canadian Maple. This material may be layered between 6 and 9 times across the deck. You may seek the guidance of a salesperson or if you have one, a buddy who rides motorcycles. Those with more experience are undoubtedly aware of the kind of wood that the board is constructed from.
In my experience, maple boards survive for a significantly longer period. Compared to other materials, they do not wear out as easily and do not chip on the sides as soon as possible. In addition, they are stronger in executing tricks. So, it’s a best wood for skateboard.
Best wood for skateboards deck
The region around North America’s Great Lakes is home to some of the continent’s most sought-after timber, which is used in the production of skateboard decks. The wood is more properly known as sugar maple.
Hardwoods, like maple, are characterized by a slower growth rate and a higher density than softwoods. This species is utilized for various purposes, including the construction of baseball bats, bowling alley lanes, NBA basketball courts, and skateboard boards.
The length and severity of the winters in the Great Lakes region cause the trees to mature very slowly and produce growth rings that are relatively close together. Wood with a greater density and greater strength typically has growth rings that are more closely spaced the best wood for skateboards deck.
How to Select the Appropriate Skateboard Deck
Skateboards comprise quite a few different components, but the skateboard deck is undoubtedly one of the most vital elements. When you’re skateboarding, you’ll be standing on a skate deck, a flat board. Regarding skateboarding, a short board is preferable to other boards like cruisers and longboards, especially for street and vet skating.
It also continues to be the best alternative for doing stunts, regardless of whether you are a novice or an experienced performer.
Choosing the right deck size is the first of several decisions to make while building a full skateboard. The selection of the board shape is also of the utmost significance. You’ll be limited in the tricks you can pull off on your skateboard by its length, breadth, materials, and concave.
Depending on how often and how hard you skate, you may need to replace the deck of your skateboard anywhere from a few weeks to a year after you first get it. When your skateboard deck’s nose, sides, or tail begins to show indications of splitting, it’s time to get a new one and start skating again.
If you ride your skateboard in damp or cold environments, the contour of your board can warp, and the wheels on your skateboard can become uneven.
Warehouse Skateboards provides customers with access to an extensive inventory of skateboard decks available in various designs, sizes, weights, colors, and patterns. Please look at our stock to locate the skateboard deck that best complements your sense of style.
Features of skateboard decks
Skateboard Decks Call Outs
Skateboard decks can be found in a wide range of sizes. The majority, however, are 7-10 inches broad and made of 7-layer wood, bamboo, resin, carbon fiber, or plastic construction. Determining which skateboard deck is ideal for you depends on the terrain you will be skating on and, of course, the brand you favor the most.
When selecting a skateboard deck, width, not length, should be your primary consideration. The width of a skateboard deck ranges, on average, from 7.50″ to 8.25″—your size and how your skateboard will determine the appropriate width.
If you buy a deck that’s too wide for your height and shoe size, skateboarding and trick riding may be more difficult. If you choose a board that is too small for your height and the size of your shoes, you will find that it is not easy to maintain your balance and that you will not feel stable. In most cases, riders in their teens and adults require a width of at least 7.5 inches.
Skaters that skate on ramps and vert ramps and larger skateboarders should opt for a wider deck, whereas street skaters should choose a board with a lower surface area.
The length of a skateboard can be measured from the front edge of the nose to the back edge of the tail. The average length of a short board is between 28 and 32 inches.
However, only experienced skateboarders care about length. When creating your skateboard, you should give primary thought to the width and wheelbase rather than focusing on the length.
The wheelbase is the distance between your board’s mounting holes. The distance between these mounting holes determines your front-rear wheel spacing. The location where the truck mounting holes are drilled into the deck is how manufacturers determine the vehicle’s wheelbase. The wheelbase is 13 to 15 inches.
Some skateboards feature many truck attachment holes, but most have only one (or “wheelbase options”). The performance of the board can be significantly altered by adjusting the wheelbase. Your level of experience will determine the appropriate wheelbase for you.
The Head and the Tail
Your skateboard’s nose is considered the “front” of the board, while the tail is considered the “back.” It may not be easy to discern which end is which, but most cards have illustrations to help you determine which side is which. The kick on the nose of many skateboard decks is more pronounced than the kick on the board’s tail.
Holes for Mounting
Mounting holes are pre-drilled holes on a skateboard that serve as attachment points for the trucks. The first pair of four holes are located near the head, and the second set of four holes is located near the tail.
Ply refers to the thin layers of wood that are pressed together in such a way as to create the skateboard deck. Instead of constructing a deck out of a single piece of solid wood, most producers stack many pieces of wood in a cross-grain pattern to produce an extremely durable board. Most skateboards do not have more than nine plies, and the standard board has seven plies.
The curvature of the deck’s wood that runs between the nose and the tail is known as concave. With concave, you can steer your skateboard better and it will last longer. Read the concave guide that follows and learn more about the many types of concave shapes.
The abbreviation for “Effective Foot Platform” is “EFP.” EFP stands for the space on the top of the deck where riders stand to control the board. This is different from the wheelbase, which only measures distance. Wheelbase tells how far something is. EFP is comparable to the portion of a skateboard deck that is not designated as the nose or the tail.
The edges that run the length of your board are called rails. The shape of these edges can change how your board rides. Skateboards often have rounded rails, and because of their shape, these rails are ideal for performing flip stunts.
During slides, your shoes will remain firmly in place because of sharp rails’ blunt edge. Gas pedal rails, often known as GPs, are a specific form of rail shape in which some sections of the rails have been chopped to provide a beveled edge.
The sharpness of the rail is reduced, and concave is made less severe by GPs. When sliding, gas pedals give you more control and improve your comfort level. The board’s concave also plays a role in determining what your rails are capable of doing.
Best wood for skateboards: FAQs
What is the best wood for skateboards?
Maple wood is a suitable wood type for skateboards
What kind of plywood is most suited for skateboards?
The best plywood to use when manufacturing skateboards is Baltic or Russian Birch which is 1/8 of an inch thick.
Does it matter what kind of wood a skateboard is made of?
Neither choice is very advantageous, as all of them are equally durable and reliable.
Best wood for skateboards| Final Words
Skateboards come in various shapes and materials, but maple best wood for skateboards is the most common and widely used and is also considered the Best wood for skateboards. Maple is the ideal material for a skateboard because of its strength and resilience, which enables it to withstand substantial amounts of wear and tear.
Because maple wood is significantly thicker and heavier than other types of wood, bamboo plywood for longboards is sometimes used with maple plywood to lighten the load slightly.